Tapcon Drill Bits
Tapcon Drill Bits Features:
- Masonry drill bits with a carbide tip for strength and durability
- Ensure the precise drilling of pilot holes when installing Tapcon anchors.
- For installing 1/4″ Tapcon fasteners, use a 3/16″ Tapcon drill bit
- For installing 3/16″ Tapcon fasteners, use a 5/32″ Tapcon drill bit
- Use with a hammer drill for best results
- Drills up to 75 holes
- Tight bit tolerance provides maximum anchor performance
NOTE: Not all products are currently listed on our website. If you don’t see the specific product you are looking for, please contact us for assistance.
| Item # | Diameter | Total Length | Description |
| 70201001 | 5/32" | 3-1/2" | for 3/16" Tapcons |
| 70201002 | 5/32" | 4-1/2" | for 3/16" Tapcons |
| 70201003 | 5/32" | 5-1/2" | for 3/16" Tapcons |
| 70201004 | 3/16" | 3-1/2" | for 1/4" Tapcons |
| 70201005 | 3/16" | 4-1/2" | for 1/4" Tapcons |
| 70201006 | 3/16" | 5-1/2" | for 1/4" Tapcons |
| Fixture Thickness | Recommended Anchor Length | Drill Bit Length | |
| 0 to 1/4" | 1-1/4" | 3-1/2" | |
| 1/4" to 3/4" | 1-3/4" | 3-1/2" | |
| 3/4" to 1-1/4" | 2-1/4" | 4-1/2" | |
| 1-1/4" to 3-1/4" | 2-3/4" | 4-1/2" | |
| 1-3/4" to 2-1/4" | 3-1/4" | 5-1/2" | |
| 2-1/4" to 2-3/4" | 3-3/4" | 5-1/2" | |
| 2-1/2" to 3" | 4" | 5-1/2" |